POLYBIND COMPLETE SAND s the first polymeric sand specifically designed for drainage and non-drainage base systems. It can be used with concrete pavers, wetcast and natural stones. It is recommended for a variety of uses, including pool sides, patios, foot paths, driveways, parking spaces, pavements etc… This complete multi-purpose sand is available in three colors: Nevada Tan, Oxford Grey and Ivory White. It sets above the freezing temperature 32°Fand can be used for joints up to a maximum of 1 inch.
|Helps prevent weed sprouting.|
|Helps prevent damages caused by insects.|
|Helps prevent erosion due to climatic conditions, such as wind, rain and freezing.|
1. With a measuring tape, measure how many feet long the bed is. Then measure how many feet wide. Multiply these two figures. The total is the square foot area of that landscape bed.
2. Decide how thick you want your mulch to be (2” is average). For new landscape beds, 4” of mulch is recommended. If you are just top dressing a previously mulched bed, you may wish to use as little as 1” of mulch. Using the conversion chart below or Mulch Calculator to the right, you can figure how many cubic yards or bags of mulch, soil or gravel to order.
3. If you still have questions, please call our visit one of our stores. If you have the total area of your landscape beds calculated, we’d be glad to help you figure the amount of mulch, soil or gravel you will need.
BULK MATERIAL ONE cubic yard will cover approximately:
1296 sq. ft. 1/4″ deep
648 sq. ft. 1/2″ deep
324 sq. ft. 1″ deep
162 sq. ft. 2″ deep
108 sq. ft. 3″ deep
81 sq. ft. 4″ deep
1 square yard = 9 square feet
1 cubic yard = 27 cubic feet