Loading... Please wait...
  • Image 1

Rock Salt

Call (216) 986-7000 for pricing!
Weight:

Cubic Yards Calculator

Product Description

Rock Salt is mined Sodium Chloride that has been crushed and screened to comply with ASTM specifications for deicing salt. Particles are irregular, white to gray in color. Rock Salt can be used for control of snow and ice on paved and other solid surfaces. Rock Salt is not suitable for application on turf or around trees and shrubs. Rock Salt should not be applied to concrete aged less than two years. Works until 20 degrees Fahrenheit .

Available in bulk, 50#.

Pallet pricing available.

APPLICATION DIRECTIONS

Sprinkle on ice or snow at a rate of 4-6 lbs. per 100 sq ft. Application rate will vary with the amount of ice or snow present on the ground. To help minimize the potential for surface damage on concrete surfaces, use only enough salt to melt the snow or loosen the ice, then promptly remove the slush that forms.

CONTAINS Sodium Chloride – NaCl dry basis Calcium sulfate – CaSO4 Magnesium Chloride – MgCl2 Water insolubles

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

How to Measure

How To Figure The Area Of Your Landscape Beds or The Area You Want To Mulch:

1. With a measuring tape, measure how many feet long the bed is. Then measure how many feet wide. Multiply these two figures. The total is the square foot area of that landscape bed.

2. Decide how thick you want your mulch to be (2” is average). For new landscape beds, 4” of mulch is recommended. If you are just top dressing a previously mulched bed, you may wish to use as little as 1” of mulch. Using the conversion chart below or Mulch Calculator to the right, you can figure how many cubic yards or bags of mulch, soil or gravel to order.

3. If you still have questions, please call our visit one of our stores. If you have the total area of your landscape beds calculated, we’d be glad to help you figure the amount of mulch, soil or gravel you will need.

BULK MATERIAL ONE cubic yard will cover approximately:
1296 sq. ft. 1/4″ deep
648 sq. ft. 1/2″ deep
324 sq. ft. 1″ deep
162 sq. ft. 2″ deep
108 sq. ft. 3″ deep
81 sq. ft. 4″ deep

Conversions:
1 square yard = 9 square feet
1 cubic yard = 27 cubic feet

 

Newsletter

Kurtz Brothers Inc.
6415 Granger Road Independence, OH 44131